Access Point  What is it? + Features and Uses ▷ 2020

You will need to know what an access point of a net computing when you want to expand quickly and without spending more than the Wifi. For this it is convenient that you understand what this hardware is for and how you can configure it.

This information can be found in the following paragraphs. We will explain the main characteristics of an access point and what are its benefits when you use them.

In addition, you will know the difference between a router and a AP in a simple way. You should also not miss the explanation of the step by step to create an AP.

What is an access point and what is it for on a computer network?

An AP (for its acronym in English Access Point) is an electronic device used to wirelessly connect multiple computers to form a network (called Wlan) and at the same time to interconnect with another external network. The latter is done through a cable that connects to a router, hub or switch.

In this way you can create a home WiFi network without using cables to access the Internet. It is only necessary that a mobile or computer that is in the house sends requests to the access point so that it communicates with a website. The great advantage of this hardware is that allows you to expand your network quickly and at low cost, because it does not require wiring or special installations. This causes the signal to reach more places in a simple way.

What are the main characteristics of an access point?

What are the main characteristics of an access point?

Among the most outstanding characteristics of an access point are:

  • They work by means of radio waves, which avoids the use of cables to connect the equipment.
  • It not only supports connecting devices but also other access points, so it is recommended to use it when you need to expand the network to improve the wireless signal.
  • Works with any device that has a network card, regardless of the type of operating system the computer has.
  • Also supports cable connection to form LAN networks.
  • By having ports LAN can work mixed. That is, you can route data wirelessly and over cables at the same time without saturating computers.
  • It has antennas to improve signal transmission, but they are vulnerable to distance and interference from objects.
  • It works with 2.4 and 5 GHz frequencies, which makes an AP a very versatile hardware to create WLAN networks.
  • The standards it uses in general are of the IEEE type 11b, 802.11g Y 802.11n. So the speed can exceed an average of 300 Mbps, although you can also find those that exceed 1.6 Gbps.
  • Support connection via Bluetooth.

Router vs Access Point What are the differences between the two?

The router is the device installed by the Internet service operators in homes and is used to access the Internet through a network WLAN. Its scope can reach up to 70 meters at a frequency of 2.4 GHz. Instead, an AP is a hardware that is used to extend the network and thus be able to go further with a better signal. This device requires the existence of a router, like the latter of a modem to moderate the signal.

Learn step by step how to use an access point to enter a network

Learn step by step how to use an access point to enter a network

The step by step you must do to use an access point is:

Enter the access point configuration panel

The first thing you should do is access the graphical interface of the hardware configuration menu. For this it is necessary that you write the IP address in the URL bar of the browser ( Once you have entered this information you will have to enter the user ID and password.

Access the WiFi option

Depending on the model and brand of your AP the name of the function will change, but you will always have to look for the tool that is related to the options of Wifi.

Modify the data to access the AP

Once you have found it you will have to press it and Enter to configure the SSID, wireless network login password, and security method. Finally, you will have to change the channel to distinguish the one from AP and from router. When you finish click on To accept and exit the configuration panel.

If you have any questions, leave them in the comments, we will answer you as soon as possible, and it will also be of great help to more members of the community. Thank you! 😉

You may be interested:

Rate this post

Leave a Comment