Burn Image for Raspberry Pi  Step by Step Guide ▷ 2021

For fear of getting complicated, someone might prefer buy a ready-made micro SD card with settings to install it to the Raspberry Pi 3 for example. Nevertheless, Recording an image doesn’t have to be scary. As in any process, there are steps to follow and these steps are not complicated.

Remember that, for the hob to function properly, you need have the operating system installed and since there is no hard drive, micro SD card is the only storage medium available to be able to achieve it.

Next, we will tell you what these images are that you must copy, what the function they fulfill, how to record them without any type of errors and you will know a couple of applications that will make your life easier on the way. The best is that, If you propose to follow the step by step to the letter, you will be able to finish the task successfully.

What are the most common mistakes when burning an ISO image for the Raspberry Pi?

Raspberry configuration

As the Raspberry Pi update progresses, New tools come out that make the configuration work easier. But if they are not used in the proper way, we make mistakes that prevent us from operating it.

Take note of some common mistakes when recording an image:

  • Copy an image from Windows Explorer and paste it on the micro SD card.
  • Have a non-class 10 SD card.
  • Copy the image to the card without having previously formatted it.
  • Install without having the updated operating system or use an older version of the image that does not correspond to the Pi.
  • Load the file without decompressing.
  • Use an application that does not record the OS image correctly.
  • Press the button in the application “Read” instead of “Write”. This causes the system image to be lost.
  • Have the file “IMG” with some blank space in its location.

Learn step by step how to record an image on Raspberry Pi from scratch and without errors of any kind

An image is the combination of the operating system and applications in a single file that allows the Raspberry Pi to start when we turn it on and it has the micro SD card inserted, loading all the programs that are needed for its operation.

This picture must be recorded with the extension “.img” which must be interpreted as a boot disk by the microcomputer. Sometimes, for reasons of space, the files are compressedIn that case, it is necessary to unzip them and extract the file and then enter it on the card.

We will show you how to record an image using one of the following three applications:

With Berryboot

Install BerryBoot on the Raspberry Pi

Berryboot is a program that works as installer and bootloader, occupying less space, installing several operating systems simultaneously and can even be used remotely.

To record the image, you must follow the following steps:

  • Download and install the latest version of Berryboot.

Download Berryboot for Raspberry Pi

  • When you open the application, a welcome screen appears. Here we must give “And it is“To the video option and”Wired”In Network, in addition to configuring the country where you live. At the end you hit “Okay”.
  • At this moment, the options of where we want the system to be installed appear. Select the SD card. To do this, we must remember the name it has. We give the end in “Format”.
  • Select the operating system and install according to the available options or, failing that, add the one of your preference.
  • Once you click on “To accept”, The process will begin which will last a few minutes and when it is finished, it will show us the operating systems that have been installed.

We already have the card ready, what is missing is custom the.


Noobs for Raspberry Pi

The name NOOBS means “New Out Of Box Software ”, a reference in English to a beginner. Beyond that, it is a useful tool to install the operating system to the Pi, also from the micro SD card with a minimum available space of 4Gb.

The way to do the installation is very simple, you can achieve it quickly and easily by following these steps:

  • The first thing you should do is download NOOB.

Download NOOB for Raspberry Pi

  • Format the card by inserting it into a memory reader. Go to “My PC”, select the option “Format”And leave the values ​​as they are. Just make sure the format is “FAT 32”.
  • Unzip the file where the NOOBS and drag it to the card. When they finish passing the files, you can take it to the Raspberry to configure it.

With Raspberry Pi Imager

Install Rasbian from Raspberry Imager

This software is developed by the creators of Raspberry with the purpose of assist users in installing the operating system. It is compatible with the current versions of the device and is open source, available for both Windows, Linux and Mac.

To record the image, we follow the following steps:

  • We download the latest version and we install it on a computer with Windows, Linux or Mac.

Download Raspberry Pi Imager for Windows

Download Raspberry Pi Imager for MacOS

Download Raspberry Pi Imager for Linux

  • After, we execute the program and we find the welcome interface.
  • Touch choose the operating system that we want to install, we click on the option “Choose OS “ and a list with those that are available will be displayed.
  • Select the operating system that you prefer.
  • Next, we choose the device in which we are going to install it. We played on the name corresponding to the micro SD.
  • Once let’s choose the system and the storage place, the option “Write”. We click and the copy will begin.
  • Must be wait for the file transfer to finish. At the end of copying, the tool itself verifies that everything is in order and will inform you if it is correct.
  • Click on “Continue”, We extract the memory card. Now we have to take it to the Raspberry Pi.

It is necessary to emphasize that this simple program is very fast And, with the new configuration system included, a window opens in which we choose the name we want to assign it, the Wi-Fi data, the time zone where we are located and if we want to accept connections through SSH. Items such as sound playback after completing a task and ejecting the memory card can also be made ready.

As you have seen, we have no reason to shy away from recording the image for use on the Raspberry Pi. The steps are simple and the friendly interface of the tools helps to meet the requirements. In the case of the three tools mentioned and described above, what we must do is install the monitor, keyboard and mouse to the Raspberry, and make the necessary configurations so that they run without problems.

Each one has its particularities, so it is up to you to choose which one suits you. In popularity, the first place goes NOOBS, which shows a full version and a lite version. For its part, BerryBoot allows you to install even from a USB device and has HDMI support. Finally, in the case of Raspberry Pi ImagerAs the brand’s own application, it offers the peace of mind of being fully compatible and adjustable to the devices.

If you have any questions, leave them in the comments, we will answer you as soon as possible, and it will also be of great help to more members of the community. Thanks! 😉

Author: Mario José

Graduated in journalism, specialized in investigation, I look for the truth of all things. Now 100% focused on technology, computing and Internet issues.

You may be interested:

Rate this post

Leave a Comment