Change DNS of Any WiFi Router  Easy Guide ▷ 2020

When it comes to optimizing and improving a navigation network, there are many factors involved, even though you may not believe it. Since, beyond making use of the appropriate router and the indicated cables, it is also valuable get excellent privacy. For which, it is necessary to take into account other components of your Internet provider.

In this sense, the optimization of DNS servers play a key role in increasing the privacy of your network. The best method to implement is to change the DNS of the router you are using. Since, DNS servers In addition to ensuring greater speed, they also provide more security while browsing the Internet.

In this sense, although many users assume that configuring or changing DNS is not an easy task, the truth is that It will seem very simple when using the procedure that we indicate throughout the post and understand all the information that we detail.

Why should I change my router’s DNS server addresses?

Before knowing why it is necessary to change the DNS server addresses of your router, it is valuable to understand what is DNS about. In this sense, a DNS server or “Domain Name System” It is a system that consists of the basis of the current Internet and therefore, it is in charge of “translate” the domain names of the web pages to the IP address of the computer where the website you are looking for is hosted.

In this sense, it refers to a system contained in a server of your Internet provider that you have access to all web page domain names and their corresponding IP addresses. Which means that if DNS doesn’t exist, you should remember the IP addresses of all the sites you want to visit on the web.

For its part, you may be wondering why it is necessary to change the DNS server addresses of your router device. Given this, we indicate that, to obtain a good Internet browsing experience, it is not enough to have a router that allows you to make the most of the connection provided by your Internet service provider.

In such a way that, it is also necessary to take into account other parameters of great relevance. Well, even if you think that these are optimized by default, the opposite is likely to happen. Therefore, by making the required adjustments or configurations, you can improve the privacy of your network and also optimize speed while browsing.

Thus, in terms of security, modifying the DNS servers that you use to browse allows you to avoid any risk of contracting malware while searching for information on the Internet or browsing from any platform. With what, you will get excellent security and privacy.

Among other reasons, we highlight that once you change the DNS of your router, you can also specify better performance of this essential device. Thanks to this, it will be possible to obtain much more effective responses. Since, the whole process will be streamlined and you will be able to access the IP address of the web page in question faster.

Steps to change the DNS addresses of your WiFi router easily and quickly

Before indicating the step by step to follow to modify the DNS addresses of a router, it is very important to note that not all these computers allow changing DNS. Because, many of them contain the company’s servers in an internal configuration and, therefore, do not allow to modify them. In this case, you will have to do it manually from the computer and for many users, it can be somewhat complicated to do.

But, if luckily, the model of your WiFi router allows you to change your own DNS without any restrictions, this procedure will be very simple to carry out in order to acquire a better navigation on the web, that is, faster and more private.

Next, each step to carry out:

Open the configuration of the router in question

Open the configuration of the router in question

To begin, the first thing you have to do is open the configuration of the router you are using. This can be done by accessing the gateway from your browser, which could be “” or similar to this.

On the other hand, if you do not know what the IP of your WiFi router is, it is necessary to find out quickly from your Windows computer. To do this, simply proceed to open an MS-DOS window and in it, type the following: “Ipconfig”. Now, at this point, go to the section “Gateway” and there you will see the IP of the router in order to access the configuration through it.

Enter the username and password of your router

Once you specify the IP address of the device, before entering, it is necessary that enter both the username and the password of the router. In general, these are contained in the instruction manual of the same (check at the bottom).

To give you a hint, in case you never changed them, the most used by default are the following:

  • admin / admin
  • Admin /
  • / admin
  • 1234/1234

Look for the DHCP server configuration section

It should be noted that the easiest way to adjust the network through DNS is taking advantage of the benefits of DHCP servers including all routers. Given that, DHCP is responsible for granting an IP address along with some network parameters to all computers that connect to it. In this way, said server has the power to configure the DNS servers of all the computers that are connected to the network.

Now, once you enter the router configuration with the steps explained above, you must locate the DHCP server configuration section. Which, most likely, is included in basic configuration or within “LAN settings”. This will depend on the model of your router, basically.

As an example, we indicate that in the case of a TP-Link Archer D2 router, the DHCP server settings are located from the following shortcut: Advanced> Network> Lan Settings.

Look for the DHCP server configuration section

Choose DNS servers

Done the above, it is time to choose between two DNS servers, apart from configuring the IP and DHCP network. Taking into account that these DNS will be adjusted in the computers once they receive the indicated IP.

On the other hand, in the case of the “free” routersThese allow you to modify the DHCP server completely. Since, unlike Internet operator routers that normally have this function disabled, free routers are more customizable. As a result, users save more time by being able to indicate that each time a certain computer connects, it is assigned a fully customized DNS server.

But well, each router is a different world and therefore, the configuration capacity of yours will depend on what type and what brand it is. Taking into account that, for this reason, it is difficult to detail the steps to follow for each of them.

List of the best 100% operational public DNS servers

List of the best 100% operational public DNS servers

Among other things, if you prefer to use a free and / or public DNS, there are multiple alternate DNS servers with which you can improve your privacy, even more. They also allow you to bypass the annoying regional blocks that limit your browsing on the web, due to those policies imposed by the same operators that offer you Internet.

In this sense, it is extremely important to know which third-party DNS and currently operating, you can use to add an extra layer of security and with it, avoid DDoS attacks, for example. Like to optimize browsing speeds. So, then, know the solutions that exist in this regard today, from the following lList of the best DNS servers with their IP addresses:

  • Alternate DNS: /
  • CleanBrowsing: /
  • Cloudflare: /
  • Comodo Secure DNS: /
  • DNS Advantage: /
  • DNS: /
  • Dyn: /
  • Fourth Estate:
  • FreeDNS: /
  • Google: /
  • GreenTeamDNS: /
  • Hurricane Electric:
  • IBM Quad9:
  • Level3: /
  • Neustar: /
  • Norton ConnectSafe: /
  • OpenDNS Home: /
  • OpenNIC: /
  • puntCAT:
  • SafeDNS: /
  • SmartViper: /
  • UncensoredDNS: /
  • Verisign: /
  • WATCH: /

If you have any questions, leave them in the comments, we will answer you as soon as possible, and it will also be of great help to more members of the community. Thank you! 😉

You may be interested:

Rate this post

Leave a Comment