CONNECT WiFi Printer – All Brands  Step by Step ▷ 2020

Currently, most printer models already have the Wi-FI technology, this with the aim of making things much easier for users. However, many of the people who acquire this type of equipment never use it correctly, many of them do not take advantage of all its features and continue to use them through the cables.

More and more the models of printers with connection to Wi-Fi that go to the marketsThese are created to be able to print documents, photographs, among other things without having to use the connection cables. In addition, it will allow you to make prints without the need to have your computer or laptop next to the printer.

That is why today we are going to teach you how you can connect your printer with wireless connection either at your work or home, this will allow you to make prints very easily and quickly through the wireless network configured with your equipment. As well as being able to take advantage of all the printing functions.

Steps to install and connect your WiFi printer correctly

Be able to perform this installation and configure your printer to the network Wi-Fi is extremely easy, this It will allow you to print either from your computer, laptop or mobile device.

This technology has already been included in practically all equipment today, which is very likely that you have one of these printers in your home, Keep in mind that the installation and connection process may vary depending on the brand of it, that is why here we bring you what are the steps to carry out this process according to the different most recognized brands in the market.

HP

Most HP printers today have wireless network connection. From 2014 onwards, the brand began to include this option in each of its equipment in order to make it easier for its users to manage and use them.

If you are one of the users who have an HP at home or work with connecting to a wireless network Here we show you what are the steps so that you can install it and connect it to Wi-FI.

  • To start with this process, the first thing you have to do is locate your printer near the router.
  • Then you will connect to power.

HP

  • Then you go to turn on the printer and install the print cartridges, for this you can be guided by the manual of it.

HP

  • Now you just have to wait for the machine to go through its startup routine, including the printing page and alignment.
  • The next thing to do is choose one of the connection methods.
  • If your printer supports it you can choose Ethernet, you plug in the computer and then start installing the printing software.
  • Once installed, you must disable Ethernet connection the system, and then turn on Wi-Fi to start using it through the local wireless network.

Epson

Most Epson equipment has this function included, which will allow you to enjoy all the functions via Wi-Fi network without any problem. In order to carry out this connection you just have to follow the steps that we will explain below:

  • To begin with the installation of it, the first thing you have to do is insert the installation CD / DVD of the team. If you don’t have this you can download the software through the internet from the Epson official website.
  • You must connect Epson equipment to the current, but what not connected to the computer via USB.
  • The next thing will be to insert the CD and start with software installation, To do this, you just have to follow all the instructions that appear on the screen.
  • Select your preferred language and click “Continue”.
  • You have to accept the software license agreement in order to continue with the “Installing the software.”
  • And then you must click on “Install”.

Epson

  • Please note that installation may take a few minutes.
  • Then the “Setting” of the printer, you are going to click “Next”.

Epson

  • Now two options will appear on the screen, you will select “Wireless connection” and finally you click on “Next”.

Epson

  • A new screen will appear, there you will select “I am going to configure the printer for the first time” and you click “Next”.

Epson

  • Now the wireless connection process will start, this can be done automatically or manually. If your computer connects automatically, it will appear the next window.

Epson

  • If the computer does not connect automatically This window will appear and you must do the following.

Epson

  • Then you must select some of the following methods: “To configure the product use the button on the product control panel” or “Use printer button” and you click “Next”.
  • Once this is done, it will be finished the process of installing and configuring the Wi-Fi network.

Canyon

If you are a Canon user, you can also do this in a very simple way, one of the most effective methods to be able to install and the connection to the wireless network is through the “Connection button” also know as “WPS”.

This will allow you to make this connection between the devices in an easy and fast way. In order to make this connection through the method “WPS” You just have to follow the steps that we will explain below:

It is important to mention that before carrying out this it is necessary that two requirements can be met: “The access point must have a WPS button” Y “The network to be used has to be WPA or WPA2 security protocol.” Once we are sure that we have these two conditions, this process can begin.

  • The first thing we have to do is turn on the printer.

HP

  • Now the button will light up. “Wifi” To do this, it will be held down for several seconds until the button light turns on.
  • You have to make sure that the button starts to blink, once this is so, you must go to the access point and click on the WPS button, this should be done quickly no more than one minute.

Canyon

  • Note that the light of the Wi-Fi button will continue to flash while searching for power. The Wifi will start to flash when this is done connect to the wireless network access point.
  • After the printer has connected to the wireless network, the Wi-Fi button will stop flashing and stay permanently on.

Once all this is done, we can determine if the configuration has been done correctly. For this you can print network settings from print. For this we are going to do the following:

  • The printer should be lit.
  • Now enter a A4 size sheet.
  • Then you are going to press the button “Resume” or “Cancel” until the button light blinks at least 15 times.
  • Once the button is released the printer will start printing.

Canyon

  • Regarding printing, it is necessary to be able to check that it indicates “Active” and that the correct name of the wireless network.
  • After this it will be completely finished the installation and configuration of WPS. In this way, you can start to get the most out of your printer through the Wi-Fi network.

Brother

Currently Brother is considered one of the best printer brands on the market. It is characterized by its excellent performance and quality. Most of their teams have wireless connection which allows its users to get the most out of these equipment. In order to carry out the configuration and connection of these machines with a Wi-Fi wireless network you must follow these steps:

  • The first thing you are going to do iss connect the machine to an electrical outlet or point. Once it is connected, you will turn it on, keep in mind that it must not be connected to the computer by the USB cable.
  • Now you are going to turn on your computer.
  • Then you will enter the CD-DVD to your CPU unit to begin the installation of the Brother machine software.

Brother

  • The installation screen will appear automatically on your monitor, select the preferred language and click on “Next”.
  • Now you will see the main menu of the CD-DVD. The option will appear on the screen “User Account Control” you are going to click “Allow” and then in “Yes”.
  • A window with the license agreement will appear, you will click on “Yes” you approve of this agreement.
  • Then you will select “Wireless Network Connection” and then in “Next” or “Next”.

Brother

  • Now you will see two options, you will choose “Brother Peer to Peer Network Printer” and then “Next”.

Brother

  • Now a new window will appear on the screen, you will get two options where you will choose “Change the Firewall port settings to enable network connection and continue with the installation” and to finish you will click on “Next”.

Brother

  • A new list will appear, there should appear your Brother printing peripheral. Then you will click “Next”. You have to follow the instructions that are indicated to install the printer driver to carry out the network connection.
  • Once this is done, you will have finished the Brother machine settings.

If you have any questions, leave them in the comments, we will answer you as soon as possible, and it will surely be of great help to more members of the community. Thank you! 😉

You may be interested:

Rate this post

Leave a Comment