PUT DFU Mode or Restore on iPhone  ▷ Step by Step ▷ 2020

Unfortunately, Apple devices, whether they are iPhone mobiles or iPad tablets, are not infallible and can present failures, which undoubtedly leave us out of square without knowing what to do on some occasions. In addition, some cases arise in which it is irremediable to have to reinstall the operating system of those devices. However, for the benefit of iOS users, there is a solution that protects a way to repair a specific software problem in the terminal and refers to entering it in the “recovery mode“,”restore mode”Or mostly known as”DFU mode “.

While it is true, The method allows us to factory restore any of these iOS devices in a completely simple and efficient way, connecting it to iTunes. In addition to this, you can require it when you want jailbreak your device, which refers to the process of remove certain limitations imposed by Apple through the use of modified kernels. The most important thing in these cases is that you make sure of what you do very well.

Also, on a regular basis, it is essential to put an iPhone or iPad in DFU mode once iTunes does not recognize it, when the screen has been locked with the Apple logo for many minutes or, when the screen is not observed to connect iTunes. In short, it is about all the problems that can be linked to the software and that luckily, are solved by placing the electronic device in this method to finally recover it completely.

Steps to put and activate the restore mode on the iPhone or iPad

restore mode on iPhone or iPad

First of all, keep in mind that performing a restoration is extremely easy. Below we detail the procedure that you must carry out:

  • Initially, what you should do is turn off iPhone or iPad completely. That is, press the button at the top of the device, until the option “Slide to power off”And so on, just slide the control.
  • When it’s already off, connect the USB cable to the iPhone or iPad and the other end to a computer with iTunes. While doing this step, you should keep pressed home button which is located on the front of the terminal. However, if you have an iPhone 7, 8 or iPhone X you must hold down the volume down button.
  • Subsequently, press and hold the home or volume down button, until a start screen appears. Connect to iTunes.
  • Once it appears on the screen of your device, you can release the home or volume down button. Now, if this screen does not appear, you need to repeat the steps again from the beginning. To finish the procedure, iTunes will show you a window like the one we show you next:

Steps to put and activate the restore mode on the iPhone or iPad

In this window, you can choose between restoring the current version that the device has or update to the latest version available. If you choose the restore option, you should know that all data saved on iPhone or iPad will be lost. So it is always essential to make backup copies so that in the event of a failure, all the data is not lost.

Then, when you restore or update, you can try if your device fit absolutely fine. If so, perfect because you can now use it as if nothing had happened and continue enjoying it.

But, if you have not been able to restore the device with this procedure, there is still one thing you can do and is to put the device in DFU mode and thus attempt a successful restoration of the iPhone. Therefore, we explain how to do it below.

How to put DFU mode on iPhone to restore it?

How to put DFU mode on iPhone to restore it?

This refers to a more powerful solution or even more “aggressive”Compared to restoration. So if the latter is not enough, it is recommended with full responsibility to use the DFU.

Now, when you use this method, you must be very clear that this will completely delete the iPhone data plus, will be configured as a factory device, that is, completely new. Although, once the system is restored, the action of installing on it, a backup copy that you have is supported and that is why it is recommended, the importance of make constant backups.

In this sense, we let you know the steps you must take if you want to restore your iPhone mobile:

  • It is worth highlighting what is needed a computer with iTunes and so, open said platform there. For later connect the device with the USB cable.
  • Later, turn off the iPhone Y press and hold the button at the top, so that the shutdown bar appears.
  • When you completely turn off the mobile, you must press the home button or the volume down button at the same time, if you have an iPhone 7, 8 or X; and the power button located on the front of the cell phone. This, at least, for 10 consecutive seconds. Therefore, it is recommended to count those seconds, since otherwise, the process will not work in any way. Well, during this time the Apple logo will disappear from the screen.
  • As these 10 seconds pass, you can stop pressing the power button but you must press and hold the home button or the volume down button, until iTunes recognize iPhone.
  • Now when iTunes identifies that device, a window will appear informing that it has detected a terminal in that state and by pressing “To accept”The restore will start.

To conclude, just wait for the restoration process to complete and voila, you will have your iPhone ready to use. But nevertheless, in case you do not want to perform the restoration and you already have the mobile in DFU mode, you only have to press and hold the home button and the top button until the device reboots normally.

What are the differences between DFU mode and restore mode on an iPhone phone?

What are the differences between DFU mode and restore mode on an iPhone phone

While it is true, both are very useful when there are problems with the terminal software. However, these present differences depending on the situation in which the fault is generated.

When it comes to DFU mode, it is essential to use it only if you want load a specific version of the operating system. Since this solution, it skips the iOS iBoot bootloader, which is useful for Jailbreak users.

On the contrary, when you submit the terminal to restoration method, it is commonly carried out if the mobile presents some problems but still, you want to restore the version you currently have installed or change to the latest version available. That is, in these cases, simply use the restoration.

Among other differences, we limit the following:

  • The appearance of the screen. Since once appears on the phone screen, a white USB cable along with the iTunes logo, it is because you are in recovery mode. On the other hand, if the screen shows absolutely nothing and stays black, it is the most “aggressive” system, that is, the DFU.
  • Preservation of data saved on iPhone. As we have ratified throughout the post, using DFU mode is a much more forceful method than to place the mobile in recovery. Since it implies set up cell phone from scratch, as factory. Which undoubtedly produces the loss of data stored in the terminal, which you can then restore only if you have a backup.

If you have any questions, leave them in the comments, we will answer you as soon as possible, and it will surely be of great help to more members of the community. Thank you! 😉

You may be interested:

Rate this post
Categories iOS

Leave a Comment