UPDATE GOOGLE CHROMECAST  ▷ Step by Step Guide ▷ 2020

Google Chromecast is a small HDMI device that allows you to send the signal from an Android device to a television. It has a wireless connection that, when connected to the same network as a smartphone or tablet with the same operating system, allows, through an application, the content to be displayed on the screen to which it is attached .

This little device is mostly used on occasions when you have a video on your terminal and you want to enjoy it on a bigger screen or, in the same way, a series of photographs or music that can be had on a tablet. Its mission lies in turn televisions into large multimedia centers starting from the use of another android device which is responsible for sending the signal at all times.

Its functions are gradually improving, but for this it is necessary to have the most recent updates. If problems arise and you are looking how to update Google Chromecast to the latest version available, we give you the answers you need in this step by step guide. We explain what you have to do and we also explain how to access the new updates before anyone else.

Steps to install and update Chromecast to the new version

As usual, updates arrive automatically on these devices so that the user does not have to do anything. However, if Google releases a new version or patch and your device does not receive it, then you should follow these Steps to install and update Chromecast to the new version.

Next, we leave you all the instructions that you must carry out to achieve it:

1 – Save the IP address of your Chromecast

Turn on your device with Chromecast and once it has started and is initialized, open the application “Google Home” to be able to access the device configuration data.

Go now to the section “Devices” and click on it to continue. You will then see a new screen open. Here, you have to click on the button with 3 vertical dots and, within the drop-down that appears, click on “Setting”.

Edit enter Google Chromecast Settings

Now, go down the sections until you reach the one of “information”. Look at all the data that appears and keep the numbers next to “IP adress”. There are 4 groups of digits that normally begin with “192”. Copy them all, you will need them.

View Chromecast device IP address

2 – Turn on your PC and log in as administrator

After having fulfilled the previous point, you have to turn on the PC, since you need it to continue. When loading the operating system, be sure to choose an account that has administrator permissions or that is directly the administrator. You can see how to log in as administrator in Windows from here.

Since we are going to have to modify system parameters and make certain adjustments, it is important to use a user of this type, since otherwise nothing can be done or windows will not stop appearing asking for passwords.

3 – Open PowerShell and enter the necessary commands

When you are already in the system, you have to click on the menu button “Start”And, in the search bar that appears, enter the following: “PowerShell”. A string of results will appear in which you must click on the one that corresponds to the program we are looking for, it will coincide exactly with what you have written.

Force Chromecast Update with PowerShell

*Note: in case you use Windows 7 or any version of Windows 8 / 8.1, you have to enter a command within this program to enable all its capabilities, it is the following: “Set-ExecutionPolicy RemoteSigned -Force” (without quotation marks).

Now, within this command window, what you should do is enter this whole string of code that we are going to tell you. You must write the IP that we save in point 1 in the field that we indicate:

Invoke-WebRequest -Method Post -ContentType “application / json” -Body ‘{“params”: “ota foreground”}’ -Uri “http: // IP HERE: 8008 / setup / reboot” -Verbose -UserAgent “curl”

When done, press the key “Enter” and a process of download and update the firmware on the Chromecast. If it doesn’t, restart from the program Google Home and try again.

In the event that you use Mac or Linux instead of Windows, you should repeat the whole point 1. However, in point 2 do the following:

Mac / Linux – Open the command console and run the code

If you are using a Mac:

Once it is started you must go to “Finder”And click on it. Then, click on “Applications“, in “Utilities“And finally, double click on”Terminal”.

If you are using Linux:

When you’re on the desktop, you just have to press the key combination “Ctrl” + “Alt” + “T” or, if it doesn’t work, “Windows” + “T”. Another possibility is to look in the toolbar and open the console.

Now, within this new window to write, enter the command that we are going to tell you. Remember to put the IP where we indicate it:

curl -X POST -H “Content-Type: application / json” -d ‘{“params”: “ota foreground”}’ http: // IP HERE: 8008 / setup / reboot -v

How to download and force new Google Chromecast firmware updates?

Like we have already said, nothing should be done to download the new firmware updates from Google Chromecast. As long as the device is correctly connected to the network and has no problems, the patches and updates will be downloaded and installed automatically, without having to interact, unless the user is asked for confirmation.

If it fails, you can follow any of the procedures explained in the previous section. Although, if you prefer, you have the option of sign up for the advancement program to receive much newer versions, which are not available to normal users.

Download the new firmware updates from Google Chromecast

If you want to enable this possibility, follow the steps that we are going to indicate now:

  • With your Google Chromecast connected and activated, and the application “Google Home”Open, click inside the section “Devices” to move on.
  • Now, you have to click on the 3 circles placed in a column at the top right. A small drop-down panel will open.
  • Within this menu, you have to press the option “Setting” to access all device settings.
  • Once you are inside the section of “Device configuration”, scroll down until you see a section called “Advancement Program”. You have to click on it to advance.
  • Now, press the button “Join the program”And enables or disables the “Allow email notifications” so that the team will notify you every time there is a new update.
  • After doing this, you will likely have to enter your Google account. Put the associated email or phone number and the access code in the fields that appear, in case the data is requested.
  • Now, just click on “It is understood”Inside the warning message and you will be part of the “Advancement Program”.

From this moment, the newest updates will be installed automatically, even those that are experimental in nature. This can cause installations to arrive very often or sometimes not everything works as it should; although most of the time what will happen is that your updates will be installed days or even weeks before the rest of the users.

If you have any questions, leave them in the comments, we will answer you as soon as possible, and it will surely be of great help to more members of the community. Thank you! 😉

You may be interested:

Rate this post

Leave a Comment