View System Information in Windows 8  Step by Step Guide ▷ 2020

Many times we need to know in depth certain information specific to our computer and we don’t know exactly how to access it. In the case of Windows 8, there are many alternatives to which you can go to find out this type of data.

Details regarding what graphics card do you use, the amount of RAM, the IP adress, details of your motherboard, etc, you can get them by using the tools built into your computer or through the assistance of external programs dedicated to it.

If you want to learn How to see the information of the Windows 8 operating system on your computer? We invite you to continue reading this step-by-step guide. You will be able to access common data and other a little more specific, along with its characteristics.

Learn step by step to view the system information of your Windows 8 PC

Learn step by step to view the system information of your Windows 8 PC

If you need to know exactly what version of Windows is running on your device, you can do it by carrying out a series of very simple steps. First of all, you must press on the Windows + R, then write Winver in the table corresponding to Open and, finally, click on To accept.

In case your computer is running Windows 8.1 or Windows RT 8.1, the way to obtain more information is as follows:

  • If the equipment is touch, swipe in from the right edge of the screen. Go to Setting and select in Change PC settings. Continue as indicated from step 3.
  • If you use a mouse, place the pointer in the lower right corner of the screen and move it up. Select in Setting and finally click on the option Change PC settings.
  • Login to PC and devices / PC information.
  • On windows, you can take a look at both the edition and the version of Windows that your computer is running.
  • Specifically on PC / System Type, you will know if you are running a version of 32-bit or 64-bit Windows.

Discover step by step how to see more important information about your PC

Know the technical specifications of your computer it can be very important if you want to carry out certain configurations, updates or even for install new programs. In the case of Windows 8, you can access different sections where you will get important information about your Pc. To enter these data, you can do it through the Windows native tool or through the use of external applications.

Here are the steps to follow to learn more about your computer through the System Information section:

  • Press the key Windows + R for the picture to be displayed Run.
  • Inside it write the command “Msinfo32” and click on To accept.
  • A window will appear where you will know in detail all the components of your system. Go to the left column and select the option System overview.

IP adress

View IP address in Windows 8

Know her IP address of your computer It is easier than it seems to be.

The steps to follow for the Windows 8 version are as follows:

  • Click on the windows key to access the Home screen.
  • Writes “Cmd” inside the search engine and press Enter.
  • This will make the application run Symbol of the system. Inside it, type “Ipconfig” and press Enter again.
  • In case you are connected to Wifi, take a look at the section Wi-Fi wireless LAN adapter, specifically where it says IPv4 address. Right there, you will get the local IP address of your PC.

Performance of your CPU

See CPU Performance in Windows 8

For those users who want know much more specific information about your devices, As the performance of your CPU, one of the best options is to use external tools. Most of them are free and portable, which means that they do not need to be installed on the computer. We recommend the CPU-Z tool. To obtain it you just have to click on the following link:

Download CPU-Z Windows

Then you will have to accept the agreement and press Next on the next three pages. It should be noted that in one of them they will ask you if you want to have a shortcut on the desktop. When the installation is complete, you can run it to start working with it. When you open it, you can see different tabs that correspond to different components. When entering CPU, you will have in your hands all the information of the process and its cores.


See RAM in Windows 8

To know exactly how much RAM does your Windows PC haveYou can also do it in two ways. Directly from the system or with the help of external tools such as CPU-Z, Speccy, etc.

The procedure to obtain this type of information is as follows:

  • Enter the menu Setting of your device. To do this, you must select the Settings icon located at the bottom of the notification panel or in the left column of the Start menu.
  • The window of Windows Settings.
  • Click on the section System it has a laptop icon.
  • In the column on the left side, select the section About.
  • There you will find the category of Device Specifications. Look for the parameter Installed RAM and its right side shows the amount of gigs of RAM you have.


See Motherboard in Windows 8

For detailed information regarding the motherboard of your computer, you can again turn to the help of external tools. However, it is also possible obtain this data through the equipment itself.

In this sense, we will explain how to do Windows commands through the console:

  • First you must remove the command console, pressing the Windows + R keys.
  • In the window that opens, you must write “Cmd” and press Enter.
  • Now is the time to write “Wmic baseboard get product, manufacturer, version, serialnumber” at the command console. It is essential that the code is written as is, without spaces between the commas.
  • Press Enter.
  • Once this is done, the system itself Windows will detail the information regarding your motherboard.

This method can be a bit confusing for users who are not used to programming or who enjoy a friendlier interface. Therefore, if you are this type of user, we suggest you go to other tools such as CPU-Z.

Graphic card

View Graphics Card in Windows 8

Yes you require this information, there is a very simple method to access. Thanks to this, Not only will you have access to the data related to your graphics card, but you will also know other basic components of your computer such as which processor it uses.

The step by step is as follows:

  • Go to the search option and type in the box “Dxdiag” without the quotes.
  • The information window collected by DirectX, where you can take a look at a complete description of the system. This includes:
  • Name processor and graphics card.
  • Speed the processor works with.
  • Version DirectX installed.
  • RAM total.
  • Motherboard and BIOS name installed on the computer.
  • Version Windows.

Finally, we remind you that it is a procedure that also you can do it with the help of free tools and very easy to use as CPU-Z and GPU-Z. The positive thing about them is that they are not only in charge of identifying the components, but also of detail the characteristics of each of them.

If you have any questions, leave them in the comments, we will answer you as soon as possible, and it will be of great help to more members of the community. Thank you! 😉

You may be interested:

Leave a Comment